NPort S9450I

RUGGED SERIAL DEVICE SERVER

NPort S9450I - 4 Port RS-232/422/485 Rugged Serial Device Server with Managed Ethernet Switch

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Fanless

These products use heatsink, heatpipe and extrusion technology to dissipate the heat generated by the system rather than using traditional fans thus improving system reliability and longevity.

Linux

This product supports Linux based kernels. See product datasheet and manual for a list of compatible Linux kernels and distributions (for development and pre-sales support please contact our technical sales team).

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

5 Year Warranty

These products come with a standard five year manufacturer warranty.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

NPort S9450I rugged serial device server
Featured in:Moxa NPort Serial Device Servers

Request a quote for this product

Enquiry information
Your name
Company name
Email address
Telephone

Add to quote list

Add the NPort S9450I to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
NPORT S9450I-WV-T

NPort S9450I with 5x 10/100BaseT(X) ports and 24/48V DC power (-40°C to +85°C)

NPORT S9450I-HV-T

NPort S9450I with 5x 10/100BaseT(X) ports and 88-300V DC or 85 to 264V AC power (-40°C to +85°C)

NPORT S9450I-2M-SC-WV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) multi-mode SC ports and 24/48V DC power (-40°C to +85°C)

NPORT S9450I-2M-SC-HV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) multi-mode SC ports and 88 to 300V DC or 85 to 264V AC power (-40°C to +85°C)

NPORT S9450I-2M-ST-WV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) multi-mode ST ports and 24/48V DC power (-40°C to +85°C)

NPORT S9450I-2M-ST-HV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) multi-mode ST ports with ST connectors and 88 to 300V DC or 85 to 264V AC power (-40°C to +85°C)

NPORT S9450I-2S-SC-WV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) single-mode SC ports and 24/48V DC power (-40°C to +85°C)

NPORT S9450I-2S-SC-HV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) single-mode SC ports and 88 to 300V DC or 85 to 264V AC power (-40°C to +85°C)

NPORT S9450I-2S-ST-WV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) single-mode ST ports and 24/48V DC power (-40°C to +85°C)

NPORT S9450I-2S-ST-HV-T

NPort S9450I with 3x 10/100BaseT(X) ports, 2x 100BaseF(X) single-mode ST ports and 88 to 300V DC or 85 to 264V AC power (-40°C to +85°C)

Product
Availability
CBL-F9M9-150

DB9 Female to DB9 Male Serial Cable, 150cm

3 in stock
Next day delivery i
MINI DB9F-TO-TB

Mini Female DB9 to Terminal Block

13 in stock
Next day delivery i
10 incoming
CBL-F9M9-20

DB9 Female to DB9 Male Serial Cable, 20cm

CN20070

DB9(F) to RJ45 (10-pin) Cable

WK-51-01

Wall-mounting Kit, 51mm wide

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

NPort S9450I overview

Description
Downloads

The NPort S9450I serial device server is designed for connecting industrial automation serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. The device servers are built solid with a metal housing, screw connectors, and provide full surge protection. The NPort S9450I device is extremely user-friendly, making simple and reliable serial-to-ethernet solutions possible.

The NPort S9450I serial device servers each have two Ethernet ports that can be used as Ethernet switch ports. One port connects directly to the network or server, and the other port can be connected to another NPort IA device server or another Ethernet device. The dual Ethernet ports help reduce wiring costs by eliminating the need to connect each device to a separate Ethernet switch.

The NPort S9450I has two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help ensure uninterrupted operation of your device server.

To ensure safe and reliable operation in industrial environments, the NPort S9450I device servers have obtained various industrial certifications, including UL508 and UL61010 safety certification for industrial control equipment. In addition, these device servers are IEC 61850-3, IEEE 1613 compliant (for power substations) and UL/cUL listed (for Class1, Division 2, Groups A,B,C,D).

For more information about the NPort IA5450A please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Features
  • 4-port RS-232/422/485 serial interface
  • Supports up to 5 managed Ethernet switch ports (fibre available with some models)
  • DNP3 and Modbus protocols supported
  • IEC 61850-3, IEEE 1613 compliant (for power substations)
  • Ethernet redundancy with Turbo Ring/Chain and RSTP/STP
  • Real COM/ TTY drivers for Windows and Linux
  • Supports IEC 61850 MMS protocol
  • Supports IEC 62443 Level 2
  • Extended -40°C to +85°C wide operating temperature
Enquire about the NPort S9450I
Need more info or project pricing for the NPort S9450I?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk

Similar products to the NPort S9450I

+44(0)1782 337 800
+44(0)1782 337 800