The 2407 4-port USB to serial adapter offers an easy way to connect multiple RS-232 or RS-485 devices via a single USB port.
With the unique VersaCom multi-interface connector design included on the 2407, both RS-232 and two-wire RS-485 signals are always present and active on the RJ45 serial connectors. Simply select the appropriate pin out for RS-232 or two-wire RS-485 on each individual port.
There is never a need to open the enclosure to set internal jumpers or switches, so field installation and service is easy. Status LEDs display transmit and receive data activity.
Installation and setup is easy with the 2407. Each serial port appears as a standard COM port to the host system enabling compatibility with legacy software.
The 2407 uses a state machine architecture that greatly reduces the host computer’s overhead when communicating over multiple ports simultaneously. Data rates up to 921.6K bps are supported.
The 2407 is USB bus powered, so no external power supply is required. For conveniently powering serial peripherals, ordering options allow an external power source to be connected to a DC jack on the rear of the unit. The supplied power is fused and connected to pin 5 on each of the four RJ45 connectors.
To further simplify connecting to VersaCom RJ45 connectors, Sealevel offers a number of accessories including RJ45 modular adapters.
With these helpful adapters you can easily connect to serial ports on virtually any computer, PLC, or peripheral regardless of the device’s serial connector type or gender. For more information please browse our full line of adapters and converters.
Features
- Manufacturer : Sealevel Systems
- Interface : USB to RS-232/485 RJ45 Adapter
- Ports : 4; VersaCom design allows RS-232 or two-wire RS-485 selection via cabling on each individual port
- UART : High Speed USB/UART with 128-byte Tx FIFO and 384-byte Rx FIFO
- Max. Data Rate : 921.6K bps
- Max. Data Distance : up to 4000ft
- Other Features : Housed in rugged, attractive plastic enclosure
- Connectors : 4 x RJ45 with Tx/Rx status LEDs
- Cables : 72" USB Cable Included (CA179) with high-retention USB type "B" connector preventing accidental disconnection of USB cable
- Power : Powered by USB connection
- Current Requirements : +5V @ 300mA
- Operating Temperature : 0 to +70C
- Software : SeaCOM software drivers included
- Warranty : Lifetime Warranty