ADAM-6022

ADAM-6022-A1E

ETHERNET DUAL LOOP PID CONTROLLER

ADAM-6022 - Ethernet-based Dual Loop PID Controller with Modbus TCP

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

ADAM-6022 Ethernet Dual Loop PID Controller
Featured in:ADAM Modules - Buy online•ADAM-6000 Ethernet Distributed I/O Modules•Advantech Distributed I/O Modules

Request a quote for this product

Enquiry information
Your name
Company name
Email address
Telephone

Add to quote list

Add the ADAM-6022 to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
ADAM-6022-A1E

Ethernet-based Dual Loop PID Controller with Modbus TCP

i Request factory lead time
Quote
View ADAM-6022 peripherals
Product
Availability
ADAM-6520-BE

5 Port 10/100BaseTX Unmanaged Industrial Ethernet Switch with wide operating temperature (-10C to +70C)

2 in stock
Next day delivery i
i Request factory lead time
Quote
ADAM-6520L-AE

5 Port 10/100BaseTX Unmanaged Industrial Ethernet Switch with standard operating temperature (0C to +60C)

i Request factory lead time
Quote
ADAM-6520I-AE

5 Port 10/100BaseTX Unmanaged Industrial Ethernet Switch with extended operating temperature (-40C to +85C)

i Request factory lead time
Quote
* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Industry insight.
Network know-how.
Impulse engineers and specialists have the industry insight and network know-how to design forward looking solutions for wide-ranging environments.
Discover our Industrial IoT capabilities

ADAM-6022 overview

Specification
Description
Downloads
Input
Analog
Channels
6
Input Type
V, mA
Input Resolution
16-bit
Input Sample Range
10 S/s (sum)
Input Range
±10 V, 0~20 mA, 4~20 mA
Output
Analog
Output Channels
2
Output Type
V, mA
Output Resolution
12-bit
Output Range
0~10 V, 0~20 mA, 4~20 mA
Communication Interface
Ethernet
Isolation Voltage
2000V DC
Protocol
Modbus/TCP, TCP/IP, UDP, HTTP, DHCP
Connectors
1x RJ45, 1x 13-pin plug-in screw terminal, 1x 9-pin plug-in screw terminal
Input Voltage
10V to 30V DC
Operating Temperature
-10°C to +50°C
Certification
CE, FCC
Mounting
DIN-rail

Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications.

A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser.

The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.

Impulse is a leading UK distributor of Advantech products and can supply you the ADAM-6022 along with a wide range of industrial computing and communication products.

For more information about the ADAM-6022, please contact our technical sales team on +44 (0)1782 337 800, or alternatively submit an enquiry.


Features
  • Loop Number : 2 (3 x AI, 1 x AO, 1 x DI, 1 x DO for each control loop)
  • 10 ~ 30V DC Power Input (4W @ 24V DC)
  • Over Voltage Protection : +/- 35V DC
  • Isolation Voltage : 2000V DC
  • Built-in TVS/ESD Protection
  • Power Reversal Protection
  • 10/100Base-Tx RJ45 LAN Interface
  • Supported Protocols : Modbus /TCP, TCP/IP, UDP and HTTP
  • System and Communication Programmable Watchdog Timer
  • -10C ~ +70C Operating Temperature
  • 6 Differential Analog Input Channels (16-bit Resolution)
  • Input Type : V, mA
  • Input Range : +/-10V DC, 0-20mA, 4-20mA
  • Sampling Rate : 10 samples/second (total)
  • Input Impedance : 20Mohm
  • Accuracy : +/-0.1% of FSR
  • 2 Analog Output Channels (12-bit Resolution)
  • Output Type : V, mA
  • Output Range : 0-10V DC, 4-20mA, 0-20mA
  • Accuracy : +/-0.1% of FSR
  • Current Load Resisitor : 0-500ohm
  • 2 Digital Input Channels (Dry; Wet Contact)
  • 2 Digital Output Channels (Open Collector to 30V, 100mA load)
  • Power Dissipation : 300mW for each module
  • Class 1, Division 2 approved for use in hazardous environments
ADAM-6022 Datasheet
Enquire about the ADAM-6022
Need more info or project pricing for the ADAM-6022?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk

Similar products to the ADAM-6022

+44(0)1782 337 800
Happy Holidays from Impulse! Please note that we will be closed for the holiday period from 20th December, and will reopen on 2nd January. Our last shipping date of the year to customers will be 18th December 2024.
+44(0)1782 337 800
ProductsIndustrial IOT DevicesAutomation and I/O DevicesRemote I/O Modules OverviewAll Remote I/O ModulesADAM-6022
+44(0)1782 337 800