The APAX-5040 modules offers 24 sink or source load digital input channels. The input channels can accept 2-wiring inputs from a DC voltage source, to determine the state of limits, standard switches or proximity switches.
The APAX-5040 is part of the APAX-5000 Programmable Automation Controller series from Advantech. Impulse can supply you the APAX-5040, along with a range of communication, expansion and I/O modules to meet your automation application requirements. For more information about the APAX-5040 please submit an enquiry form or contact our technical sales team for more assistance.
Features
- Supports both sink and source type digital inputs (up to 24 channels)
- Rated voltage input value: 24V DC
- ±70V DC over voltage protection
- Input characteristics curve according to IEC 61131 Type 1
- Each digital channel has its own status LED for easy diagnostics
- 2500V DC isolation between input channels and backplane
- CE and FCC Class A certification
- Digital Inputs :
- Channels : 24
- Points per Common : 12
- Type : Sink or Source Load
- Input Voltage : See Datasheet
- Input Impedance : 10k Ohm
- Signal Input Delay : From Logic Level 0 to 1 - 0.2ms; From Logic Level 1 to 0 - 0.2ms
- Operating Frequency : 3kHz
- Input Filter : 3ms
- Power Consumption : 2W @ 24V DC (typical)
- Protection :
- 2500V AC Isolation Between Channels and Backplane
- Over Voltage Protection
- Mechanical :
- Chassis : ABS+PC
- Dimensions : W30mm x H139mm x D100mm
- Weight : 160g
- Environmental :
- Operating Temperature : -10°C to +60°C (when vertically mounted)
- Storage Temperature : -40°C to +70°C
- Relative Humidity : 5 to 95% (non-condensing)
- Certification : CE, FCC Class A