MGate EIP3270

5 Year Warranty

These products come with a standard five year manufacturer warranty.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

DIN-rail mountable

These devices have been designed to be mounted directly on to an industry standard DIN-rail.

Ethernet/IP

EtherNet/IP is a communication protocol designed for use in process control and other industrial automation applications. EtherNet/IP is an application layer protocol treating devices on the network as a series of objects. EtherNet/IP is built on the Common Industrial Protocol for access to objects from ControlNet and DeviceNet networks. Not to be confused with standard Ethernet.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

IECEx

Certified to standards relating to equipment for use in applications subject to explosive atmospheres.