NPort 5630-8

NPORT 5630-8

ETHERNET SERIAL DEVICE SERVER

NPort 5630-8 - 8 Port RS-422/485 Rack-mount Ethernet Serial Device Server

5 Year Warranty

These products come with a standard five year manufacturer warranty.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

EN 60601-1

This device conforms to the IEC/EN 60601-1 certification standard and has been designed specifically for use in the medical industry.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

NPort 5630-8 Ethernet Serial Device Server
NPort 5630-8
Featured in:Moxa NPort Serial Device Servers

Request a quote for this product

Enquiry information
Your name
Company name
Email address
Telephone

Add to quote list

Add the NPort 5630-8 to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
NPORT 5630-8

8 Port RS-422/485 Ethernet Serial Device Server with 100V to 240V AC (0°C to +55°C)

i Request factory lead time
Quote
View NPort 5630-8 peripherals
Product
Availability
CBL-RJ45F9-150

8-pin RJ45 to DB9 Female Cable (150mm)

14 in stock
Next day delivery i
i Request factory lead time
Quote
CBL-RJ45M9-150

8-pin RJ45 to DB9 male Cable, Length 150cm

47 in stock
Next day delivery i
i Request factory lead time
Quote
ADP-RJ458P-DB9M

DB9 Male to RJ45 Connector

i Request factory lead time
Quote
CBL-RJ458P-100

8-pin RJ45 CAT5 Ethernet Cable, 100cm

i Request factory lead time
Quote
CBL-RJ45F25-150

8-pin RJ45 to DB25 Female Cable (150mm)

i Request factory lead time
Quote
CBL-RJ45M25-150

8-pin RJ45 to DB25 Male Cable, Length 150cm

i Request factory lead time
Quote
CBL-RJ45SF25-150

RJ45 to DB25 Female serial shielded cable, 150cm length

i Request factory lead time
Quote
CBL-RJ45SF9-150

RJ45 to DB9 Female Serial Shielded Cable, 150cm length

i Request factory lead time
Quote
CBL-RJ45SM25-150

RJ45 to DB25 male serial shielded cable, 150cm length

i Request factory lead time
Quote
CBL-RJ45SM9-150

RJ45 to DB9 male serial shielded cable, 150cm length

i Request factory lead time
Quote
PWC-C13UK-3B-183

Power Cord, 10A 250V 1.8M UK BK

i Request factory lead time
Quote
WK-45-01

Wall-mounting Kit, 2 L-shaped plates, 6 screws, 45mm x 57mm x 2.5mm

i Request factory lead time
Quote
* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

NPort 5630-8 overview

Description
Downloads

With the NPort 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralising the management of your serial devices and distributing management hosts over the network.

Only basic configuration is needed with the NPort 5600 to connect up to 8x serial devices to an Ethernet network.

NPort 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8x RJ45 serial port connectors on the rear panel. This makes the NPort 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.

Real COM/TTY drivers are provided to make the serial ports on the NPort 5600 recognisable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort 5650-8 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

For more information about the NPort 5630-8 please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Features
  • 8x serial ports supporting RS-422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100V to 240V AC
  • 0°C to +55°C operating temperature
NPort 5630-8 Datasheet
Enquire about the NPort 5630-8
Need more info or project pricing for the NPort 5630-8?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk

Similar products to the NPort 5630-8

+44(0)1782 337 800
Happy Holidays from Impulse! Please note that we will be closed for the holiday period from 20th December, and will reopen on 2nd January. Our last shipping date of the year to customers will be 18th December 2024.
+44(0)1782 337 800
ProductsIndustrial IOT DevicesIndustrial Serial OverviewAll Industrial SerialSerial Device ServersNPort 5630-8
+44(0)1782 337 800