5 Year Warranty
These products come with a standard five year manufacturer warranty.
Extended Wide Temperature
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
Wide Voltage
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
RoHS
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short. The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
CE
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
FCC Approved
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
NEMA TS2
NEMA TS2 is a standard for traffic control assemblies, such as traffic lights, emergency road condition and pedestrian signs. The standard is designed for manufacturers to meet or exceed a set of minimum requirements. For more information see http://www.nema.org/Products/Pages/Transportation-Management-Systems-And-Associated-Control-Devices.aspx
NPort 6250 with RJ45 Ethernet ports and power adapter (0°C to +55°C)
NPort 6250 with NPort 6250 with SC type single-mode fibre interface and standard operating temperature (0C to +55C)
NPort 6250 with RJ45 Ethernet ports (-40°C to +75°C) (no power adapter)
NPort 6250 with multi-mode SC ports and power adapter (0°C to +55°C)
NPort 6250 with multi-mode SC ports (-40°C to +75°C ) (no power adapter)
NPort 6250 with single-mode SC ports (-40°C to +75°C) (no power adapter)
35mm DIN-Rail Mounting Kit w/ 2x DIN-rail plates and 4x screws
Mini Female DB9 to Terminal Block
6W Power Adapter, 100V to 240V AC Input w/ UK Plug, 12V DC Output @ 0.5A w/ Barrel jack, 0°C to +40°C
12W Power Adapter, 100V to 240V AC input, 12V DC output w/ UK plug and barrel connector
Locking barrel plug to bare wires cable
DB25(M) to DB9(F) RS-232 Cable, 30 cm Length
100V to 240V AC to 12V DC, 1.5A Power Adapter with UK plug and screw-type power jack (-40°C to +75°C)
Wall-mounting Kit with 2 plates and 6 screws
The 2-port NPort 6250 device servers use the SSL and SSH protocols to transmit encrypted serial data over Ethernet. Models are available for connecting to a 10/100BaseT(X) copper Ethernet or 100BaseT(X) fiber network. Both single-mode and multi-mode fiber are supported.The NPort 6250 device servers help guarantee reliability by providing users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design. If the Ethernet connection fails, the NPort 6250 will queue all serial data in its internal 64kb port buffer. When the Ethernet connection is re-established, the NPort 6250 will immediately release all of the data in the buffer in the order that it was received. Users can increase the port buffer size by installing an SD card.For more information about the NPort 6250 please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.