PCI-1712

The PCI-1712 is a powerful high-speed multifunction DAQ card for the PCI bus. Featuring a 1MHz 12-bit A/D converter, an on-board FIFO buffer (storing up to 1024 samples for A/D, and up to 32K samples for D/A conversion).

The PCI-1712 DAQ card provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, two 12-bit D/A output channels, 16 digital input/output channels, and three 10MHz 16-bit multifunction counter channels. The PCI-1712L is a low-cost version without analog outputs.

Impulse is a leading UK distributor of Advantech products and can supply you the PCI-1712 along with a wide range of industrial computing and communication products.

For more information about the PCI-1712, please contact our technical sales team on +44 (0)1782 337 800, or alternatively submit an enquiry.

Features

• Analog Input:
• Channels : 16 x single-ended/ 8 x differential (software programmable)
• Resolution : 12 bits
• Max. Sampling Rate : Multi-channel, single gain:1 MS/s. Multi-channel, multi gain: 600kS/s. Multi-channel, multi gain, unipolar/bipolar: 400kS/s
• FIFO Size : 1,024 samples
• Overvoltage Protection : 30Vp-p
• Input Impedancec: 100 MW/10 pF (Off), 100 MW/100 pF (On)
• Sampling Modes : Software, onboard programmable pacer and external
• Trigger Modes : Pre-trigger, post-trigger, delay-trigger and about-trigger
• Input Range : Please refer to datasheet
• Analog Output:
• Channels : 2
• Resolution : 12 bits
• Output Rate : 1MS/s
• FIFO Size : 32,768 samples
• Output Range : Please refer to datasheet
• Slew Rate : 20V/µs
• Driving Capability : 10mA
• Output Impedance : 0.1W Max
• Operation Mode : Software polling, continuous output and waveform output
• Accuracy : INLE: ±1 LSB. DNLE: ±1 LSB (monotonic)
• Digital Input:
• Channels : 16
• Compatibility : 5V/TTL
• Input Voltage : Logic 0: 0.8V Max. Logic 1: 2.0V Min
• Digital Output:
• Channels : 16
• Compatibility : 5V/TTL
• Output Voltage : Logic 0: 0.8V Max. Logic 1: 2.0V Min
• Output Capability : Sink: 8.0mA @ 0.8V, Source: -0.4mA @ 2.0V
• Pacer/Counter:
• Channels : 3
• Resolution : 16 bits
• Compatibility : 5V/TTL
• Max. Input Frequency : 10MHz
• Reference Clock : Internal: 10MHz, 1MHz, 100kHz, 10kHz
• External Frequency : 10MHz Max
• General:
• Bus Type : PCI V 2.2
• I/O Connector : 1 x 68-pin SCSI female connector
• Dimensions : L175mm x H100mm
• Power Consumption : Typical: 5V @ 850mA, 12V @ 600mA. Max: 5V @ 1.0A, 12V @ 700mA
• Operating Temperature : 0°C to 60°C
• Storage Temperature : -20°C to 85°C
• Storage Humidity : 5 to 95% RH Non-condensing
• 16 single-ended or 8 differential or a combination of analog inputs
• 12-bit A/D converter, with up to 1 MHz sampling rate
• Programmable gain
• Automatic channel/gain scanning
• Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
• Two 12-bit analog output channels with continuous waveform output function
• 16 channel digital input and 16 channel digital output
• Three 16-bit programmable multifunction counter/timers on 10MHz
• Auto-calibration (AI/AO)
• PCI-Bus mastering data transfer
• Pre-, post-, about- and delay-trigger data acquisition modes for analog input channels
• Flexible triggering and clocking capabilities