R15ITWS-MHB1-EX

Front IP66 rated

The IP rating determines what level of protection a product has against the intrusion of solid objects, water, dust and liquids. This device is IP66 protected at the front meaning that certain parts are dust tight and protected from powerful water jets at certain angles. To offer complete all round protection the device should be mounted in a suitably protective enclosure or panel.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

Wide Temperature

These products utilise high quality industrial grade components enabling them to work in wide temperature environments. They are capable of running as low as -20C and as high as +70C.

Windows 10

This system can be supplied with Windows 10 configured to your specification, including disk partitioning, driver and software installations, along with Windows feature setup and application-specific configuration.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

VESA

VESA is a mounting standard for displays and systems and consists of four screws arranged in a square with the horizontal and vertical distance between the screw centres.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

PCI Express

PCI Express, officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X and AGP bus standards.

M.2

M.2, formerly known as the Next Generation Form Factor (NGFF), is a specification for internally mounted computer expansion cards and associated connectors. M.2 replaces the mSATA standard, which uses the PCI Express Mini Card physical card layout and connectors. Employing a more flexible physical specification, the M.2 allows different module widths and lengths, and, paired with the availability of more advanced interfacing features, makes the M.2 more suitable than mSATA in general for solid-state storage applications

MiniPCI Express

This system features one or more miniPCI Express (mPCIe) slots for board level expansion.