SDS-3016

SDS-3016-2GTXSDS-3016-2GSFPSDS-3016-2GSFP-T

SMART INDUSTRIAL ETHERNET SWITCH

SDS-3016 - 16 Port Smart Industrial Ethernet Switch with slim design and EtherNet/IP, PROFINET and Modbus/TCP support

5 Year Warranty

These products come with a standard five year manufacturer warranty.

Ethernet/IP

EtherNet/IP is a communication protocol designed for use in process control and other industrial automation applications. EtherNet/IP is an application layer protocol treating devices on the network as a series of objects. EtherNet/IP is built on the Common Industrial Protocol for access to objects from ControlNet and DeviceNet networks. Not to be confused with standard Ethernet.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

Modbus

Modbus is a communication protocol for transmitting information between electronic devices over serial lines or via Ethernet and is commonly used in process and factory automation.

PROFIBUS

PROFIBUS (from process field bus) is a protocol for field bus communication in automation technology. PROFIBUS links automation systems and controllers with decentralized field devices such as sensors, actuators, and encoders. PROFIBUS networks exchange data using a single bus cable.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

DIN-rail mountable

These devices have been designed to be mounted directly on to an industry standard DIN-rail.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

SDS-3016 Smart Industrial Ethernet Switch
SDS-3016SDS-3016SDS-3016

Request a quote for this product

Enquiry information
Your name
Company name
Email address
Telephone

Add to quote list

Add the SDS-3016 to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
SDS-3016-2GTX

SDS-3016 with 14x 10/100BaseT(X) RJ45 ports, 2x 10/100/1000BaseT(X) RJ45 ports and wide operating temperature (-10°C to +60°C)

SDS-3016-2GSFP

SDS-3016 with 14x 10/100BaseT(X) RJ45 ports, 2x 100/1000BaseSFP ports and wide operating temperature (-10°C to +60°C)

SDS-3016-2GSFP-T

SDS-3016 with 14x 10/100BaseT(X) RJ45 ports, 2x 100/1000BaseSFP ports and extended operating temperature (-40°C to +75°C)

Product
Availability
MDR-40-24

Industrial DIN-rail Power Supply with 85V to 264V AC input and 24V DC @ 1.7A output

9 in stock
Next day delivery i
SFP-1FEMLC-T

1 Port Fast Ethernet SFP Module with 100BaseFX multi-mode LC port (4km)

2 in stock
Next day delivery i
SFP-1GSXLC

Gigabit Ethernet SFP Module with 1000BaseSX, LC port, 0.5km (0°C to +60°C)

8 in stock
Next day delivery i
SFP-1GSXLC-T

Gigabit Ethernet SFP Module with 1000BaseSX, LC port, 0.5km (-40°C to +85°C)

4 in stock
Next day delivery i
SFP-1GLXLC

Gigabit Ethernet SFP Module with 1000BaseLX, LC port, 10km (0°C to +60°C)

2 in stock
Next day delivery i
SFP-1GLXLC-T

Gigabit Ethernet SFP Module with 1000BaseLX, LC port, 10km (-40°C to +85°C)

6 in stock
Next day delivery i
ABC-02-USB

Configuration Backup and Restoration Tool for Moxa EDS Managed Ethernet Switches (-10°C to +60°C)

MDR-60-24

Industrial DIN-rail Power Supply with 85V to 264V AC input and 24V DC @ 2.5A output

NDR-120-24

Industrial DIN-rail Power Supply with 90V to 264V AC input and 24V DC @ 5A output

RK-4U

4U 19” Rack-mounting Kit

SFP-1G10ALC

Gigabit Ethernet SFP Module with LC connector, 10km, TX 1310nm, RX 1550nm with standard operating temperature (0°C to +60°C)

SFP-1G10BLC

Gigabit Ethernet SFP Module with LC connector, 10km, TX 1550nm, RX 1310nm with standard operating temperature (0°C to +60°C)

SFP-1G20ALC

Gigabit Ethernet SFP Module with LC connector, 20km, TX 1310nm, RX 1550nm with standard operating temperature (0°C to +60°C)

SFP-1G20BLC

Gigabit Ethernet SFP Module with LC connector, 20km, TX 1550nm, RX 1310nm with standard operating temperature (0°C to +60°C)

SFP-1G40ALC

Gigabit Ethernet SFP Module with LC connector, 40km, TX 1310nm, RX 1550nm with standard operating temperature (0°C to +60°C)

SFP-1G40BLC

Gigabit Ethernet SFP Module with LC connector, 40km, TX 1550nm, RX 1310nm with standard operating temperature (0°C to +60°C)

SFP-1FELLC-T

1 Port Fast Ethernet SFP Module with 100BaseFX single-mode LC port (80km)

SFP-1G10ALC-T

Gigabit Ethernet SFP Module with LC connector, 10km, TX 1310nm, RX 1550nm with extended operating temperature (-40°C to +85°C)

SFP-1G10BLC-T

Gigabit Ethernet SFP Module with LC connector, 10km, TX 1550nm, RX 1310nm with extended operating temperature (-40°C to +85°C)

SFP-1G20ALC-T

Gigabit Ethernet SFP Module with LC connector, 20km, TX 1310nm, RX 1550nm with extended operating temperature (-40°C to +85°C)

SFP-1G20BLC-T

Gigabit Ethernet SFP Module with LC connector, 20km, TX 1550nm, RX 1310nm with extended operating temperature (-40°C to +85°C)

SFP-1G40ALC-T

Gigabit Ethernet SFP Module with LC connector, 40km, TX 1310nm, RX 1550nm with extended operating temperature (-40°C to +85°C)

SFP-1G40BLC-T

Gigabit Ethernet SFP Module with LC connector, 40km, TX 1550nm, RX 1310nm with extended operating temperature (-40°C to +85°C)

SFP-1GZXLC-T

Gigabit Ethernet SFP Module with 1000BaseZX, LC port, 80 km (-40°C to +85°C)

SFP-1FESLC-T

1 Port Fast Ethernet SFP Module with 100BaseFX single-mode LC port (40km)

SFP-1GEZXLC

Gigabit Ethernet SFP Module with 1000BaseEZX, LC port, 110km (0°C to +60°C)

SFP-1GEZXLC-120

Gigabit Ethernet SFP Module with 1000BaseEZX, LC port, 120km (0°C to +60°C)

SFP-1GLSXLC

Gigabit Ethernet SFP Module with 1000BaseSX+, LC port, 2km (0°C to +60°C)

SFP-1GLSXLC-T

Gigabit Ethernet SFP Module with 1000BaseSX+, LC port, 2km (-40°C to +85°C)

SFP-1GLHLC

Gigabit Ethernet SFP Module with 1000BaseLH, LC port, 30km (0°C to +60°C)

SFP-1GLHLC-T

Gigabit Ethernet SFP Module with 1000BaseLH, LC port, 30km (-40°C to +85°C)

SFP-1GLHXLC

Gigabit Ethernet SFP Module with 1000BaseLHX, LC port, 40km (0°C to +60°C)

SFP-1GLHXLC-T

Gigabit Ethernet SFP Module with 1000BaseLHX, LC port, 40km (-40°C to +85°C)

SFP-1GZXLC

Gigabit Ethernet SFP Module with 1000BaseZX, LC port, 80 km (0°C to +60°C)

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

SDS-3016 overview

Description
Downloads
Video

The SDS-3016 smart 16-port Layer 2 Ethernet switch is the ideal product for IA engineers and automation machine builders to make their networks compatible with the vision of Industry 4.0.  By breathing life into machines and control cabinets, the smart switch simplifies daily tasks with its easy configuration and easy installation.

In addition, it is monitorable and is easy to maintain throughout the entire product life cycle. The most frequently used automation protocols, including EtherNet/IP, PROFINET, and Modbus/TCP, are embedded in the SDS-3016 switch to provide enhanced operational performance and flexibility by making it controllable and visible from automation HMIs.

It also supports a range of useful management functions, including IEEE 802.1Q VLAN, port mirroring, SNMP, and warning by relay.

For more information about the SDS-3016 please contact the Impulse sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Features
  • 16 Port Layer 2 Smart Ethernet switch
  • 14x 10/100BaseT(X) RJ45 Ethernet ports
  • Option of 2x 10/100/100BaseT(X) RJ45 or 2x 100/1000BaseSFP ports
  • Compact and flexible housing design to fit into confined spaces
  • Web-based graphical user interface design for easy device configuration and management
  • Web-based GUI for port diagnostics with statistics to detect and prevent issues
  • Multi-language web GUI: English, Traditional Chinese, Simplified Chinese, Japanese, German, and French
  • Supports RSTP/STP for network redundancy
  • Supports MRP client redundancy based on IEC 62439-2 to ensure high network availability
  • EtherNet/IP, PROFINET, and Modbus TCP industrial protocols supported for easy integration and monitoring in automation HMI/SCADA systems
  • IP port binding to ensure critical devices can be replaced quickly without reassigning the IP Address
  • Rotary DIP switch can perform profile-based settings without using a web browser
  • Security features based on IEC 62443
  • IP40 metal chassis
  • 12V/24V/48V/-48V DC redundant dual power inputs (9.6V to 60V DC)
  • Extended -40°C to +75°C operating temperature (on -T version)
Enquire about the SDS-3016
Need more info or project pricing for the SDS-3016?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk

Similar products to the SDS-3016

+44(0)1782 337 800
Happy Holidays from Impulse! Please note that we will be closed for the holiday period from 20th December, and will reopen on 2nd January. Our last shipping date of the year to customers will be 18th December 2024.
+44(0)1782 337 800